华为交换机mac地址绑定怎么弄
How do you tie up the Mac address for the switchboard?
1、进入端口视图，打开绑定功能2、全局视图，进行绑定 例:interface gigabitethernet0/0/1 ip source check user-bind enable quit user-bind static ip-address 192。
1. Enter the port view, open the binding feature 2, global view, and bind the case: interface giftettenet 0/0/1 ip source check user-bind enable Quit user-bind state ip-address 192.
168。
0。
2 mac-address 0000-0000-0001 vlan 1000 望采纳
2 Mac-address 000-00000-0001 vlan 1000
华为交换机如何配置端口组?华为交换机端口组
How do you configure the port group for the switchboard? It's the port group for the switchboard.
华为交换机要配置端口组的具体操作步骤如下:
The specific operational steps that will be taken to configure the port group for the switchboard are as follows:
1、通过telnet登陆交换机(这里假设交换机IP地址为192。
1. Arrival switch via Telnet (assuming the IP address of the switch is 192).
168。
1。
1来作为例子讲解);
1 to explain as an example;
2、在接下来的窗口中使用system-view命令，进入【】模式;
2. Use system-view commands in the next window and enter mode [ ];
3、在进入【】模式后输入port-group 1，这个“1”就是端口组的名称;
3. Enter port-group 1 after entering [ ] mode, which is the name of the port group;
4、添加端口到端口组，[Quidway-port-group-1]group-member GigabitEthernet 0/0/25 to GigabitEthernet 0/0/36(添加25-36口到端口组);
4. Add port to port group, [Quidway-port-group-1] group-member GigabitEthernet 0/0/25 to GigabitEthernet 0/0/36 (add 25-36 to port group);
5、就可以批量设置端口模式:[Quidway-port-group-1]port link-type access(这里设置为access模式，也可以是trunk模式的);
5. A batch of port modes can be set up: [Quidway-port-group-1] port link-type access (set here as access mode or as trunk mode);
6、设置完成端口模式之后就可以添加到vlan了，[Quidway-port-group-1]port default
6. Set up port mode to be added to vlan, [Quidway-port-group-1]port default
注册有任何问题请添加 微信：MVIP619 拉你进入群
打开微信扫一扫
添加客服
进入交流群
发表评论